Board of Technical Education द्वारा finally Mechanical Engineering 5th सेमेस्टर का नया syllabus update कर दिया है !
- सबसे पहले हम Mechanical इंजीन्यरिंग के 5th सेमेस्टर के syllabus के overview के बारे मे बात करेंगे। इसके बाद फिर हम बारी-बारी करके सभी subject के सिलैबस को full detail मे देखेंगे।
- Mechanical Engineering के 5th सेमेस्टर के syllabus का pdf download करने के लिए आप हमारे Telegram चैनल पर अवश्य visit करे।
Mechanical 5th Semester Syllabus Overview -:
- Industrial Management and Entrepreneurship Development
- Theory of Machines
- Machine Design
- Production Technology
- Production Management
- Automobile Engineering
Industrial Management and Entrepreneurship Development ( Syllabus 2020) – Mechanical
Theory of Machines (Syllabus 2020) – Mechanical Engineering
1. Simple Mechanisms (06 Periods)
1.1 Introduction to link, kinematic pair, lower and higher pair, Kinematic chain,
1.2 Different types of mechanisms (with examples)
2. Kinematic Analysis and synthesis (12 Periods)
2.1 Displacement, velocity and acceleration of plane mechanism
2.2 Graphical and analytical techniques.
3. Dynamics of Machine (12 Periods)
3.1 Static and dynamic force analysis graphical and analytical approaches
3.2 Gyrosopic action in machines.
4. Power Transmission (12 Periods)
4.1 Introduction to Belt and Rope drives
4.2 Types of belt drives and types of pulleys
4.3 Concept of velocity ratio, slip and creep; crowning of pulleys (simple numericals)
4.4 Flat and V belt drive: Ratio of driving tensions, power transmitted, centrifugal tension,
and condition for maximum horse power (simple numericals)
4.5 Different types of chains and their terminology
4.6 Gear terminology, types of gears and their applications; simple and compound gear
trains; power transmitted by simple spur gear
5. Flywheel (06 Periods)
5.1 Principle and applications of flywheel
5.2 Turning – moment diagram of flywheel for different engines
5.3 Fluctuation of speed and fluctuation of energy – Concept only
5.4 Coefficient of fluctuation of speed and coefficient of fluctuation of energy
6. Cam and follower (08 Periods)
Introduction, types of Cam and follower, construction of Cam profile for constant velocity
motion, constant acceleration motion and simple harmonic motion
7. Balancing (06 Periods)
7.1 Concept of balancing
7.2 Introduction to balancing of rotating masses (simple numericals)
8. Vibrations (08 Periods)
8.1 Types-longitudinal, transverse and torsional vibrations (simple numericals)
8.2 Dampening of vibrations
8.3 Causes of vibrations in machines, their harmful effects and remedies
Machine Design (Syllabus 2020) – Mechanical Engineering
1. Introduction (08Periods)
1.1 Design – Definition, Type of design, necessity of design
1.1.1 Comparison of designed and undesigned work
1.1.2 Design procedure
1.1.3 Characteristics of a good designer
1.2 Design terminology: , factor of safety, factors affecting factor of safety, stress
concentration, methods to reduce stress concentration, fatigue, endurance limit.
1.2.1 General design consideration
1.2.2 Codes and Standards (BIS standards)
1.2.3 Selection of materials, criteria of material selection
1.3 Ergonomics and Aesthetic Consideration in design
1.3.1 Ergonomics of design-man-machine relationship. Design of equipment for
control, environment and safety.
1.3.2 Aesthetic consideration regarding shape, size, color and surface finish.
2. Design Failure (08 Periods)
2.1 Theories of failure.
2.2 Classification of loads
2.3 Design under tensile, compressive and torsional loads.
3. Design of Shaft (12 Periods)
3.1 Type of shaft, shaft materials, Type of loading on shaft, standard sizes of
3.2 Shaft subjected to torsion only, determination of shaft diameter (hollow and solid
shaft) on the basis of :
– Strength criterion
– Rigidity criterion
3.3 Determination of shaft diameter (hollow and solid shaft) subjected to
3.4 Determination of shaft diameter (hollow and solid shaft) subjected to combined
torsion and bending .
4. Design of Key (08 Periods)
4.1 Types of key, materials of key, functions of key
4.2 Failure of key (by Shearing and Crushing).
4.3 Design of key (Determination of key dimension)
4.4 Effect of keyway on shaft strength. (Figures and problems).
5. Design of Joints (02 Periods)
Types of joints – Temporary and permanent joints, utility of various joints
5.1 Temporary Joint:
5.1.1 Knuckle Joints – Different parts of the joint, material used for the joint,
type of knuckle Joint, design of the knuckle joint. (Figures and problems).
5.1.2 Cotter Joint – Different parts of the spigot and socket joints, Design of
spigot and socket joint.
5.2 Permanent Joint:
5.2.1 Welded Joint – Welding symbols. Type of welded joint, strength of parallel
and transverse fillet welds.
5.2.2 Strength of combined parallel and transverse weld.
5.2.3 Riveted Joints. : Rivet materials, Rivet heads, leak proofing of riveted joint
– caulking and fullering.
5.2.4 Different modes of rivet joint failure.
5.2.5Design of riveted joint – Lap and butt, single and multi riveted joint.
6. Design of Flange Coupling (10 Periods)
Necessity of a coupling, advantages of a coupling, types of couplings, design of muff
coupling, design of flange coupling. (Both protected type and unprotected type).
7. Design of Screwed Joints (12 Periods)
7.1 Introduction, Advantages and Disadvantages of screw joints, location of screw
7.2 Important terms used in screw threads, designation of screw threads
7.3 Initial stresses due to screw up forces, stresses due to combined forces
7.4 Design of power screws (Press, screw jack, screw clamp)
Note : a) Use of design data book during the examination is allowed.
b) The paper setter should normally provide all the relevant data for the machine
Design in the question paper
Production Technology (Syllabus 2020) – Mechanical 5th Semester
1. Cutting Tools and Cutting Materials (06 Periods)
1.1. Cutting Tools – Various types of single point cutting tools and their uses, Single
point cutting tool geometry, tool signature and its effect, Heat produced during
cutting and its effect, Cutting speed, feed and depth of cut and their effect
1.2 Cutting Tool Materials – Properties of cutting tool material, Study of various
cutting tool materials viz. High-speed steel, tungsten carbide, cobalt steel
cemented carbides, stellite, ceramics and diamond.
2. Lathe (12 Periods)
2.1 Principle of turning
2.2 Description and function of various parts of a lathe
2.3 Classification and specification of various types of lathe
2.4 Drives and transmission
2.5 Work holding devices
2.6 Lathe tools: Parameters/Nomenclature and applications
2.7 Lathe operations :- Plain and step turning, facing, parting off, taper turning,
eccentric turning, drilling, reaming, boring, threading and knurling, form
2.8 Cutting parameters – Speed, feed and depth of cut for various materials and for
various operations, machining time.
2.9 Speed ratio, preferred numbers of speed selection.
2.10 Lathe accessories:-Centers, dogs, different types of chucks, collets, face plate,
angle plate, mandrel, steady rest, follower rest, taper turning attachment, tool post
grinder, milling attachment, Quick change device for tools.
2.11 Brief description of capstan and turret lathe, comparison of capstan/Turret lathe,
work holding and tool guiding devices in capstan and turret lathe.
3. Milling (10 Periods)
3.1 Specification and working principle of milling machine
3.2 Classification, brief description and applications of milling machines
3.3 Details of column and knee type milling machine
3.4 Milling machine accessories and attachment – Arbors, adaptors, collets, vices,
circular table, indexing head and tail stock, vertical milling attachment shover
chuck and rotary table.
3.5 Milling methods – up milling and down milling
3.6 Identification of different milling cutters and work mandrels
3.7 Work holding devices
3.8 Milling operations – face milling, angular milling, form milling, straddle milling
and gang milling.
3.9 Cutting speed and feed, simple numerical problems
4. Drilling (06 Periods)
4.1 Principle of drilling.
4.2 Classification of drilling machines and their description.
4.3 Various operation performed on drilling machine – drilling, spot facing, reaming,
boring, counter boring, counter sinking, hole milling, tapping.
4.4 Speeds and feeds during drilling, impact of these parameters on drilling,
4.5 Types of drills and their features, nomenclature of a drill
4.6 Drill holding devices.
4.7 Types of reamers.
5. Boring (06 Periods)
5.1 Principle of boring
5.2 Classification of boring machines and their brief description.
5.3 Specification of boring machines.
5.4 Boring tools, boring bars and boring heads.
5.5 Description of jig boring machine.
6. Shaping and Planing (08 Periods)
6.1 Working principle of shaper and planer
6.2 Type of shapers
6.3 Type of planers
6.4 Quick return mechanism applied to shaper and planer machine.
6.5 Work holding devices used on shaper and planer
6.6 Types of tools used and their geometry.
6.7 Specification of shaper and planer .
6.8 Speeds and feeds in above processes.
7. Broaching (04 Periods)
7.2 Types of broaching machines – Single ram and duplex ram horizontal type,
vertical type pull up, pull down, push down.
7.3 Elements of broach tool, broach tooth details – nomenclature, types, and tool
8. Jigs and Fixtures (10 Periods)
8.1 Importance and use of jigs and fixture
8.2 Principle of location
8.3 Locating devices
8.4 Clamping devices
8.5 Types of Jigs – Drilling jigs, bushes, template jig, plate jig, channel jig, leaf jig.
8.6 Fixture for milling, turning, welding, grinding
8.7 Advantages of jigs and fixtures
9. Cutting Fluids and Lubricants (06 Periods)
9.1 Function of cutting fluid
9.2 Types of cutting fluids
9.3 Difference between cutting fluid and lubricant
9.4 Selection of cutting fluids for different materials and operations
9.5 Common methods of lubrication of machine tools.
10. Grinding (08 Periods)
10.1 Purpose of grinding
10.2 Various elements of grinding wheel – Abrasive, Grade, structure, Bond
10.3 Common wheel shapes and types of wheel – built up wheels, mounted wheels and
diamond wheels. Specification of grinding wheels as per BIS.
10.4 Truing, dressing, balancing and mounting of wheel.
10.5 Grinding methods – Surface grinding, cylindrical grinding and centreless
10.6 Grinding machine – Cylindrical grinder, surface grinder, internal grinder,
centreless grinder, tool and cutter grinder.
10.7 Selection of grinding wheel
11. Modern Machining Processes (08 Periods)
11.1 Mechanical Process – Ultrasonic machining (USM): Introduction, principle,
process, advantages and limitations, applications
11.2 Electro Chemical Processes – Electro chemical machining (ECM) – Fundamental
principle, process, applications
11.3 Electrical Discharge Machining (EDM) – Introduction, basic EDM circuit,
Principle, metal removing rate, dielectric fluid, applications
11.4 Laser beam machining (LBM) – Introduction, machining process and applications
11.5 Plasma arc machining (PAM) and welding – Introduction, principle process and
Job 1. Grinding of single point turning tool.
Job 2. Exercise of simple turning and step turning.
Job 3. A composite job involving, turning, taper turning, external thread cutting and knurling.
ADVANCE FITTING SHOP
Job 1. Exercise on drilling, reaming, counter boring, counter sinking and taping
Job 2. Dove tail fitting in mild steel
Job 3. Radius fitting in mild steel
Job 4. Pipe threading with die
Job 1. Prepare a V-Block up to ± 0.5 mm accuracy on shaper machine
Job 2. Exercise on key way cutting and spline cutting on shaper machine.
Job 3. Produce a rectangular block by facing on a slotting machine
Job 4.. Produce a rectangular slot on one face with a slotting cutter
Job 5. Produce a rectangular block using a milling machine with a side and face cutter
Job 6. Prepare a slot on one face using milling machine
FORGING SHOP/FITTING SHOP/SHEET METAL SHOP
Job 1. Preparation of single ended spanner by hand, machine forging
Job 2. Preparation of simple die
Job 3. Demonstration of spinning process on lathe and spinning a bowl on a lathe machine
Job 4. Demonstration of grinding process on lathe machine and grinding a job on a lathe machine
Job 5. Preparation of utility item out of G.I. sheet
Job 6. Preparation of drilling jig
ADVANCE TURNING SHOP
1. Exercise of boring with the help of boring bar
2. Exercises on internal turning on lathe machine
3. Exercises on internal threading on lathe machine
4. Exercises on external turning on lathe machine
5. Resharpening of single point cutting tool with given geometry
1. Job on grinding machine using a surface grinder
2. Prepare a job on cylindrical grinding machine.
3. Exercise on milling machine with the help of a form cutter
4. Exercise on milling machine to produce a spur gear
5. Grinding a drill-bit on tool and cutter grinder
6. Exercise on dressing a grinding wheel
Production Management (Syllabus 2020) – Mechanical 5th Semester
1. Production Planning and Control (PPC) (12 Periods)
1.2. Objectives and factors affecting PPC
1.3. Functions(Elements) of PPC – Planning, Routing, Loading, scheduling,
dispatching, progressing and inspection
1.4. Types of production system – Flow or continuous production, Intermittent
1.5. Production Control – Objectives and fields of production control, Production
1.6 Break even analysis and Gantt chart.
2. Inspection and Quality Control (14 Periods)
2.1. Inspection – Introduction, Need and Importance
2.1.1. Types of Inspection
2.1.2. Role of operator and inspector in inspection
2.2 Quality Control
2.2.1 Introduction, Need and Importance
2.2.2 Factors affecting product quality
2.3 Quality Assurance
2.4 Statistical Quality Control (SQC)
2.4.1 Acceptance Sampling, Sampling Plan- Single and double sampling plan
2.4.2 Operating Characteristics Curve
2.4.3 Control Charts – Introduction, advantages, Types of control charts(X, R, p
and c charts)
2.4.4 Concept of ISO 9000, ISO 14000 and TQM.
2.4.5 QC tools
2.4.6 6σ Approach
3. Cost Estimation (14 Periods)
3.1 Definition and functions of cost estimation
3.2 Estimation procedure
3.3 Elements of cost, ladder of costs (simple numericals)
3.4 Overhead expenses and its distribution
3.5 Depreciation- Concept and Definition, Methods of calculating depreciation- Straight line method,
Diminishing Balance Method, Sinking fund method (Numerical problems).
3.6 Cost control- definition and objectives, Capital cost control (planning and scheduling), operating
3.7 Cost estimation for machining processes like turning, drilling, and milling.Cost estimation of forming
processes like forging, pattern making, and casting.
4. Repair and Maintenance (08 Periods)
4.1 Objectives and importance of Maintenance
4.2 Different types of maintenance- Corrective or Breakdown maintenance,
Scheduled Maintenance, Preventive Maintenance, Predictive Maintenance
4.3 Nature of maintenance problems
4.4 Range of maintenance problems
5. Labour Legislation and Pollution Control Acts (08 Periods)
5.1 Factory Act 1948.
5.2 Workmen’s compensation Act 1923.
5.3 Apprentices Act 1961.
5.4 Water Pollution Control Act 1974 and 1981.
5.5 Air Pollution Control Act 1981.
5.6 Environmental protection Act 1986.
5.7 PF Act, Employee’s State Insurance (ESI) Act
5.8 Pollution control provision in Motor Vehicle Act.
LIST OF PRACTICALS
1. Prepare a flow diagram
2. Prepare a Gantt chart
3. Draw X, R, p and c charts
4. Estimate the cost of turning
5. Estimate the cost of drilling
6. Prepare maintenance schedule
Automobile Engineering (syllabus 2020) – Mechanical
1. Introduction (06 Periods)
1.1 Automobile and its development
1.2 Various types of automobiles manufactured in India, their manufacturer
and location of their manufacturing unit.
1.3 Classification of automobiles
1.4 Layout of chassis
1.5 Types of drives-front wheel, rear wheel, four wheel.
1.6 Introduction to electric and hybrid vehicles.
1.7 Governing of fuel- carburettor, electronic control module (ECM i.e, 8 bit,16 bit
and 32 bit computers)
1.8 Concept of double overhead cam, single overhead cam, Twin cam 16
valvetechnology in 4 cylinder engine.
2. Transmission System (12 Periods)
2.1 Clutch – Function, Constructional details of single plate and multi plate
friction clutches, Centrifugal and semi centrifugal clutch, Cone clutch,
2.2 Gear Box – Function, Working of sliding mesh, constant mesh and
synchromesh gear box, Torque converter and overdrive, Introduction to
Automated Manual Transmission, Automatic transmission and Continuously
2.3 Propeller shaft and rear axle – Function, Universal joint, Differential,
Different types of rear axles and rear axle drives.
2.4 Wheels and Tyres – Types of wheels, Types and specifications of tyres
used in Indian vehicles, Toe in, toe out, camber, caster, kingpin
inclination, Wheel balancing and alignment, Factors affecting tyre life.
3. Steering System (06 Periods)
Function and principle, Ackerman and Davis steering gears, Types of steering gears –
worm and wheel, rack and pinion, Power steering-Hydraulic and Electrical.
4. Braking system (08 Periods)
Constructional details and working of mechanical, hydraulic, air and vacuum brake,
Relative merits and demerits. Details of master cylinder, wheel cylinder, Concept of brake
drum, brake lining/pad and Brake adjustment, Introduction to Anti-lock Brake System and
5. Suspension System (08 Periods)
Function and types of Coil spring, leaf spring, Air suspension, Shock
absorber –Function, construction and working of Telescopic type.
6. Battery (10 Periods)
Constructional details of lead acid cell battery, Specific gravity of electrolyte -effect of
temperature on specific gravity, Specification of battery-capacity, rating , number of
plates, selection of battery for particular use, Battery charging,chemical reactions during
charge and discharge, Maintenance of batteries, Checking of batteries for voltage and
specific gravity. Batteries for electric and hybrid vehicles.
7. Exhaust Emissions (06 Periods)
Types and use of catalytic converters, selective catalytic reduction methods for emission
control, emission norm standards i.e. Bharat norms.
Which writer’s book is best for inspection quality control in mechanical engineering 5th sem
all books best , your scucces depends on your practice